Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Preliminary Information
F8138801
14
IR Communications Menu
The IR Communications Menu displays while the
control is communicating with a PDA. The control
will jump back to the previous page when the
communication is complete.
IR Communications Error Menu
The IR Communications Error Menu displays after the
control had an error communicating with a PDA. The
control will return to previous page after 3 seconds.
Restore to Factory Defaults
When the user selects Restore All Cycles And Global
Settings To Factory-Defaults, the control resets all of
the default values. The control also resets Machine
Cycles #1 through #41. The control will also reset the
following to factory-defaults:
Default Washer-Extractor Settings
Language = English
Maximum Balance Retries = 3
Water Reuse = Disabled
Rapid Advance = Enabled
Water Recirculation = Disabled
External Dispenser Pause = Disabled
Shakeout = 40 seconds
Banner # 1 = Blank
Banner # 2 = Blank
Daylight Saving = Enabled
Water Levels
High = 27
Medium = 15
Low = 3
Water Temperature
Hot = 140 F
Warm = 100 F
Cold = 35 F
Cooldown = 110 F
Temperature Controlled Fill = Disabled
Audio Signal External Signal = Disabled
Keypad Signal (beep) = Enabled
End of Cycle / Segment Sound = Enabled Low, 5
second duration
Alarms
Fill = 5 minutes
Drain = 2 minutes
Heat = 1 hour 30 minutes
PHM1003R
Figure 3
PHM1004N
Figure 4
Invalid Data