Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Machine Cycle Definition and Operation
23
F8138801
Lubricate Bearings Menu
The Lubricate Bearings Menu displays when the
machines has run for 200 hours and the bearing is the
type that can be lubricated. The Lubricate Bearings
Menu displays during Idle Mode when the Cycle
Menu is displayed. The Lubricate Bearing Menu and
Cycle Menu will alternate being displayed.
To remove the Lubricate Bearings Menu from being
shown during Idle Mode, the user must reset the
bearing timer by navigating to the System Menu and
reset the bearing timer. Press any keypad to display
Cycle Menu while viewing Lubricate Bearings Menu.
Run Diagnostic Menu
The Run Mode Diagnostic Menu allows user to access
diagnostic information of the cycle currently running.
The menu contains speed, temperature, water level,
inputs and outputs, alarms, and machine ID.
While machine is running, press the keypad to
enter Run Diagnostic Menu.
Press the , , , or keypad to
navigate the menu.
Press the keypad to choose selection.
If the keypad is pressed, display enters Run
Menu. If nothing is selected for 15 seconds, the
display will return to Run Menu.
PHM1009R
Figure 11
Lubricate Bearings!
200 Hours Have Elapsed
PHM1010R
Figure 12
Alarms
Run Diagnostic Menu
Machine ID
Inputs and
Outputs
Speed, Temp
and Level