Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Global Setup
F8138801
42
Water Management Menu
The Water Management 1 Menu allows the user to set
the water reuse and water recirculation options to Yes
or No. If water reuse option is turned off, the Reuse
Fill Menu will not be displayed during programming
of a Segment. Press the and keypads to
move the highlighted box through the different items
in the Water Management 1 Menu. Press the
or keypad to change selections to “Yes” or
“No”.
The user can set the External Dispenser Pause On or
Off. The control default for this option is “Off”. If
programmed on, the control will wait with a normally
open contact for contact closure to indicate the need
for a pause in cycle operation.
Press the or keypad to jump to the Save
Changes Menu. Use or to move
highlighted box to “Yes” or “No”.
Press the keypad to return to Global Setup
Menu. If no changes were made, press or
keypad to return to Global Setup menu.
To view Water Management 2 Menu, press
keypad while the “External Dispenser Pause” textbox
is highlighted/
To view Water Management 4 Menu, press
keypad while the “Does the Machine Have Water
Reuse Installed?” textbox is highlighted.
The Water Management 2 Menu allows the user to
enable or disable the Water Leak Detection During
Machine Cycle parameter. Once Water Leak Detection
is enabled, the Number of Cycles Between and the
Day(s) Occurring parameters can be changed.
Press the and keypads to move the
highlighted box through the parameters of the Water
Management 2 Menu. Press the or
keypads to change the Water Leak Detection During a
Machine Cycle and Number of Cycles Between
parameters’ values. Press the keypad to change
the Day(s) Occurring parameter’s values.
Press the or keypad to jump to the Save
Change Menu. Use or to move
highlighted box to “Yes” or “No”.
Press the to return to Global Setup Menu. If no
changes were made, press or keypad to
return to Global Setup menu.
To view Water Management 3 Menu, press
keypad until the menu is displayed.
To view Water Management 1 Menu, press
keypad while Water Leak Detection During Machine
Cycle textbox is highlighted.
PHM1273R
Figure 46
Does the Machine Have
Water Reuse Installed?
Does the Machine Have
Water Reuse Installed?
External Dispenser Pause
Water Mgmt. (1 of 4)
Off
No
No
PHM1274R
Figure 47
Water Leak Detection
During Machine Cycle
Number of Cycles Between
Day(s) Occurring
Water Mgmt. (2 of 4)
0
On
S M T W R F S