Turn Off Bluetooth Button
Option Default Information
Computer is discoverable Disabled
Enable this option to ensure other devices can discover the MX3X. This option is
disabled by default.
Prompt if devices request
to pair
Disabled
A dialog box appears on the MX3X screen notifying the user a Bluetooth device
requests to pair with the MX3X. This option is disabled by default.
The requesting Bluetooth device does not need to have been Discovered by the
MX3X before the pairing request is received.
Tap the Accept button or the Decline button to remove the dialog box from the
screen.
Note: In some cases, if a Bluetooth device is already paired this setting
cannot be changed. If this is the case, an error message is displayed and the
option is not changed. The Bluetooth device must be disconnected before
changing this setting.
Continuous Search Disabled
When enabled, the Bluetooth connection never stops searching for a device it has
paired with when the connection is broken (such as the paired device entering
Suspend mode, going out of range or being turned off). When disabled, after being
enabled, the MX3X stops searching after 30 minutes. This option draws power from
the Main Battery.
Computer Friendly Name Empty
The name, or identifier, entered in this space by the System Administrator is used
exclusively by Bluetooth devices and during Bluetooth communication.
Turn Off Bluetooth Button
Tap the button to toggle Bluetooth hardware On or Off.When the button is dimmed (grey), the Bluetooth client cannot be
disabled.
Default
The default value is Bluetooth On.
E-EQ-MX3XRG-W-ARC [ 80 ] MX3X Reference Guide
