Roam Trigger
Roam Trigger
If signal strength is less than this trigger value, the radio looks for a different AP with a stronger signal.
Options:
-50, -55, -60, -65, -70, -75, -80, -85, -90 dBm
Custom (see Note)
Note: Available options may vary by SCU revision.
Default:
-65 dBm
Note: Custom parameter options: Some parameters contain an option for custom. The parameter’s value is displayed as
“Custom” when the operating system registry has been used to set the parameter to a value not available from the Global
settings parameter options. Selecting Custom for a parameter has no effect as the parameter value returns to the
previously selected value when you press Commit.
Roam Delta
Amount by which the new AP’s signal strength must exceed the current AP’s signal strength before roaming is attempted.
Options:
5, 10, 15, 20, 25, 30, 35 dBm
Custom (see Note above)
Default:
10 dBm (for 802.11b/g radio)
5 dBm (for 802.11a/b/g radio)
Note: Custom parameter options: Some parameters contain an option for custom. The parameter’s value is displayed as
“Custom” when the operating system registry has been used to set the parameter to a value not available from the Global
settings parameter options. Selecting Custom for a parameter has no effect as the parameter value returns to the
previously selected value when you press Commit.
E-EQ-MX3XRG-W-ARC [ 194 ] MX3X Reference Guide
