External Connectors / Interface / USB Host / Client Ports / Power Connector
External Connectors / Interface / USB Host / Client Ports / Power Connector
IrDA Connector (COM 2) bidir-
ectional half-duplex
Supports 115k baud
Endcap – Dual Serial, DA-9 or
DB-9 Connector (COM 1 and
COM 3)
9 Pin “D” (male) Connector. Provides connection to external devices such as a printer.
Endcap – incl Scanner (COM 3),
DA-9 or DB-9 Connector (COM
1)
9 Pin “D” (male) Connector. Provides connection to external devices such as a printer.
Endcap – incl Scanner (COM 3),
DA-9 (COM 1)
Scanner – SE923 or SE955 Symbol engine. (SE923 phased out)
Power Connector
External Battery Charger Contacts. 8.5V – 15 VDC Input Power.
Power Jack. 10.8 – 16VDC Input Power
Audio Connector Audio Jack on endcap.
Dimensions and Weight
Dimension
Length with Endcap 6” | 15 cm
Width with Endcap 8” | 20 cm
Height with Endcap 1.44” | 3.66 cm
Weight
Unit with radio, battery and scanner endcap Less than 30 oz | <850g
Battery 5.6 oz | 157g
Network Card
1.0 oz | 28g
1.6 oz | 45g
SRAM Card 1 oz | 28g
Environmental Specifications
Operating Temperature
-4°F to 122°F (-20°C to 50°C) monochrome 32°F to 122°F (0°C to 50°C)
color
Storage Temperature -22°F to 158°F (-30°C to 70°C)
ESD 8 KV air, 4kV direct contact
Operating Humidity 5% to 90% non-condensing at 104°F (40°C)
Water and Dust IEC 60529 compliant to IP66
Vibration Based on MIL Std 810D
Ambient Light – ranging from total darkness to
direct sunlight
Display readable (with backlight on) for <= two hours
Keypad readable (after previous exposure to a 60W bulb for 30 minutes)
for <= 15 minutes.
E-EQ-MX3XRG-W-ARC [ 241 ] MX3X Reference Guide
