Enable Code ID
Enable Code ID
This parameter programs the scanner to transmit the specified Code ID and/or determines the type of barcode identifier being
processed.
Transmission of the Code ID is enabled at the scanner for all barcode symbologies, not for an individual symbology. Code ID is
sent from the scanner so the scanner driver can discriminate between symbologies.
Options
l None: Programs an internal scanner to disable transmission of a code ID. After clicking the Symbology Settings but-
ton, the only entry on the Symbology listing is All, plus any configured custom IDs. Select this option to disable Code
ID processing. The barcode data is received, but is not checked for a Code ID.
l AIM: Programs an internal scanner to transmit the AIM ID with each barcode. After clicking the Symbology Settings
button, the Symbology listing includes all AIM ID symbologies plus any configured custom Code IDs. Select this option
to enable processing of barcodes with an AIM or custom Code ID.
l Symbol: Programs an internal scanner to transmit the Symbol ID with each barcode. After clicking the Symbology Set-
tings button, the Symbology listing includes all Symbol ID symbologies plus any configured custom Code IDs. Select
this option to enable processing of barcodes with a Symbol or custom Code ID. Note that the Symbol entry may not
appear for any device equipped with an integrated imager (e.g. EV-15 imager).
l Custom: Does not change the internal scanner’s Code ID transmission setting. After clicking the Symbology Settings
button, the Symbology listing includes all Custom Code IDs. Select this option to enable processing of barcodes with a
custom Code ID.
Notes
l When Strip: Code ID (see Symbology panel) is not enabled, the code ID is sent as part of the barcode data to an appli-
cation.
l When Strip: Code ID (see Symbology panel) is enabled, the entire Code ID string is stripped (i.e. treated as a Code ID).
l UPC/EAN Codes only: The code id for supplemental barcodes is not stripped.
l When Enable Code ID is set to AIM or Symbol,Custom Code IDs appear at the end of the list of standard Code IDs.
l When Enable Code ID is set to Custom, Custom Code IDs replace the list of standard Code IDs.
E-EQ-MX3XRG-W-ARC [ 129 ] MX3X Reference Guide
