EAP-FAST
EAP-FAST Credentials
To use Sign-On credentials:
l Do not enter a User and Password as the user will be prompted for the Username and Password when connecting to the
network.
To use Stored Credentials:
l Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
l Enter the password.
To use Automatic PAC Provisioning:
l No additional entries are required.
To use manual PAC Provisioning:
l Enter the PAC Filename and PAC Password.
l The PAC file must be copied to the directory specified in the Certs Path global variable. The PAC file must not be read
only.
Tap OK then tap Commit. Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU Main tab
shows the device is associated after the radio connects to the network.
Note: When using Automatic PAC Provisioning, once authenticated, there is a file stored in the \System directory with
the PAC credentials. If the username is changed, that file must be deleted. The filename is autoP.00.pac.
E-EQ-MX3XRG-W-ARC [ 216 ] MX3X Reference Guide
