LXE E-EQ-MX3XRG-W-ARC Manual

A SERVICE OF

next previous

Cable for Serial ActiveSync Connection

Note: Run “Connect” when the “Get Connected” wizard on the host PC is checking COM ports to establish a connection

for the first time.

Cable for Serial ActiveSync Connection

Serial ActiveSync

9000054CABLE, RS-232 9 Pin to 9 Pin, MX3X Serial port to PC/Laptop serial port

l Connect one end of the cable to the COM port (labeled RS-232 COM1) on the MX3X endcap.

l Connect the other end to a COMport on a PCor laptop.

IRConnection

Note: You must establish a partnership with a desktop computer prior to running ActiveSync on the mobile device. The

initial partnership must be done using direct serial or USB cable connection.

Connect the correct cable to the PC (the host) and the mobile device (the client). Select “Connect” from the Start Menu on the

client (Start | Programs | Communications | Connect).

Note: Run “Connect” when the “Get Connected” wizard on the host PC is checking COM ports to establish a connection

for the first time.

Note: USB will start automatically when the USB cable is connected, not requiring you to select “Connect” from the start

menu.

Cables for initial ActiveSync Configuration:

USB ActiveSync

MX3069CABLE - USB-Client cable, MX3X USB Client port to PC/Laptop USB port

Serial ActiveSync

9000054CABLE, RS-232 9 Pin to 9 Pin, MX3X Serial port to PC/Laptop serial port

E-EQ-MX3XRG-W-ARC [ 44 ] MX3X Reference Guide