Connect via USB
Connect via USB
Start | Settings | Control Panel | PC Connection
The default connection type is USBClient
To change the connection type or to verify it is set to USB, select
Tap the Change button. From the popup list, choose
USB Client
This will set up the mobile device to use the USB port. Tap OK and ensure the check box for “Allow connection with desktop
computer when device is attached” is checked.
Tap OK to return to the Control Panel. If desired, any control panel windows may be closed.
IMPORTANT – DO NOT PUT THE MOBILE DEVICE INTO SUSPEND WHILE CONNECTED VIA USB. The device will be
unable to connect to the host PC when it resumes operation.
Connect the correct cable to the PC (the host) and the mobile device (the client) as detailed below. USB will start automatically
when the USB cable is connected, not requiring you to select “Connect” from the start menu.
Cable for USB ActiveSync Connection:
MX3069CABLE - USB-Client cable, MX3X USB Client port to PC/Laptop USB port.
l D9 connector connects to port marked USB-C on the MX3X endcap. If there is no port on the endcap, USB cannot be
used for ActiveSync.
l The USB type A connector connects to a standard USB port on a PC or laptop.
Connect and Communicate
Start | Settings | Control Panel | PC Connection
The connection type must be changed to Serial 1 @ 57600 or Serial 3 @ 57600 depending on which serial port on the MX3X
is used.
To change the connection type tap the Change button. From the popup list, choose
Serial 1 @ 57600 or Serial 3 @ 57600
This will set up the mobile device to use the serial port. Tap OK and ensure the check box for “Allow connection with desktop
computer when device is attached” is checked.
Tap OK to return to the Control Panel. If desired, any control panel windows may be closed.
Select Start | Settings | Scanner and ensure the integrated scanner is set to a port that is NOT the same as the ActiveSync
port.
Connect the correct cable to the PC (the host) and the mobile device (the client). Select “Connect” from the Start Menu on the
client (Start | Programs | Communications | Connect).
E-EQ-MX3XRG-W-ARC [ 43 ] MX3X Reference Guide
