Setting Item Description, Instructions
System
Setup
Nozzle Check In Frequency, specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose 1 page to check
once per page.
Select Warning > On to display warnings if the noz-
zles clog during printing.
Use RemoteUI Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Reset PaprSetngs Restores settings that you have changed with Media
Configuration Tool to the default values.
Show Job Log Selecting Off prevents display of the log in Job
Menu > Job Log. Additionally, the log is not printed
if you choose Job Menu > Print Job Log. Note that
because job logs are not collected, the Status Monitor
accounting functions will not work correctly.
Prep.MovePrinter Select this option when transferring the printer to an-
other location. Follow the instructions displayed to
complete the required procedure. (See "Preparing to
Transfer the Printer.") →P.932
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
Ad-
min.
Menu
Change Password By setting a password, you can restrict menu display
and configuration as follows. Enter a number in the
range 0–9999999.
• Viewing and configuration by
administrators only
IPv4 Settings
Change Password
Init.Admin.Pswd
• Viewing and configuration by
administrators, and only viewing by other
users
Interface Setup settings (except IPv4 Settings )
Date & Time
Date Format
Time Zone
Use RemoteUI
Reset PaprSetngs
Init.Admin.Pswd Choose OK to restore the Admin. Menu password
to the default values.
Printer
Info
Paper Info Indicates the current paper size, type, and related
printer settings.
Ink Info Indicates ink levels and maintenance cartridge ca-
pacity.
Head
Info
Printhead L Indicates information about the printhead.
Printhead R
Printer Parts
>
Control Panel
>
Menu Settings iPF6300
8
846
