A SERVICE OF

logo

1. On the Tab Selection screen of the Control Panel, press or to select the Paper tab ( ).
Note
If the Tab Selection screen is not displayed, press the Menu button.
2. Press the OK button. The Paper Menu is displayed.
3. Press or to select Paper Details, and then press the OK button.
4. Press or to select the type of paper, and then press the OK button.
5. Press or to select Cutting Mode, and then press the OK button.
6. Press or to select Manual, and then press the OK button.
7. Print the job.
The printer stops advancing the paper after printing.
8. Press the Feed button.
Roll paper is fed to the specified cut position and then automatically stopped.
Handling Paper
>
Handling rolls
>
Specifying the Cutting Method for Rolls iPF6300
6
738