Cause Corrective Action
A print job for rolls was received
when a sheet is loaded.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
The roll is empty.
Cause Corrective Action
The roll is empty. Follow these steps to replace the used roll with a new roll of the same type and size.
1. Press the OK button and remove the roll.
(See "Removing the Roll from the Printer.") →P.728
(See "Removing Rolls From the Roll Holder.") →P.730
2. Load the new roll.
(See "Loading Rolls on the Roll Holder.") →P.718
(See "Loading Rolls in the Printer.")
→P.722
3. If no barcode was printed on the roll, specify the type of paper.
(See "Changing the Type of Paper.") →P.725
4. When you have selected ManageRemainRoll > On in the control panel menu and a barcode
is not printed on the roll, also specify the paper length.
(See "Specifying the Paper Length.")
→P.727
5. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen,
press the OK button.
Printing will resume, starting from the page on which the error occurred.
There is remaining
roll paper, but be-
cause it could not
be advanced, it
could not be de-
tected.
The unused portion of the roll is heavy, and this is placing a burden on the printer. It may be help-
ful to change the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
(See "Giving Priority to Particular Graphic Elements and Colors for Printing.") →P.51
Roll feed unit error.
Cause Corrective Action
The Roll Feed Unit is not
working.
Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it.
(See "Removing the Roll Feed Unit.") →P.743
(See "Installing the Roll Feed Unit.") →P.744
If the message is displayed again despite these measures, contact your Canon dealer for
assistance.
No Roll Unit.
Cause
Corrective Action
The printer has received a print job, but the Roll Feed Unit is
not installed.
Press the Stop button and stop printing.
1. Turn the printer off and install the Roll Feed Unit.
Connect the Roll Unit Cable firmly and completely.
Error Message
>
Messages regarding paper
>
iPF6300 The roll is empty.
12
983
