Cause Corrective Action
You are not using the printer
under the recommended en-
vironmental conditions for
the paper.
(See "Types of Paper.") →P.712
You are using paper that is
not compatible with auto-
matic cutting.
1. Specify Manual as the cutting method and use scissors or a cutting tool to cut the
roll.
(See "Specifying the Cutting Method for Rolls.")
→P.735
For information about paper that is compatible with automatic cutting, see the Paper
Reference Guide.
(See "Types of Paper.") →P.712
2. Press the OK button and remove the paper.
In other cases, the Cutter
Unit may be damaged.
Contact your Canon dealer for assistance.
End of paper feed.
Cause Corrective Action
You are pressing the ▲ button on the Control Panel and trying to rewind the roll to the edge. Release the ▲ button.
Borderless printng not possible.
Cause Corrective Action
The print job received specifies a
type or width of paper that is not
compatible with borderless print-
ing.
Follow these steps to change the settings of the print job to enable borderless
printing.
1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2. Make sure the correct printer driver for the printer is selected and try printing
again.
For information on types of paper compatible with borderless printing, refer to
the Paper Reference Guide.
(See "Types of Paper.")
→P.712
Select None when you have set Detect Mismatch on the control panel to Warn-
ing.
However, note that this error may cause paper jams and affect the printing quality.
Press ▲ or ▼ to select Print With Border, and then press the OK button to con-
tinue printing. The document will be printed with a border.
The loaded paper is a size not
compatible with borderless print-
ing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Replace the paper with paper compatible for borderless printing as follows.
1. Press ▲ or ▼ to select Change Paper, and then press the OK button.
(See "Removing the Roll from the Printer.") →P.728
(See "Removing Rolls From the Roll Holder.") →P.730
2. Replace the paper with paper compatible for borderless printing.
(See "Loading Rolls on the Roll Holder.") →P.718
(See "Loading Rolls in the Printer.")
→P.722
The printer now starts printing the print job.
Error Message
>
Messages regarding paper
>
iPF6300 End of paper feed.
12
987
