Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Text messages 54
11.4. EXECUTED PROGRAM COUNTERS
This counter registers the individual quantity of executions of each program. The counter increases at the
end of the program.
On the multi-function keyboard the DEL function appears. This function allows erasing the counter related to
the selected program.
11.5. LOAD COUNTERS
The use of this menu requires that the option LOAD COUNTERS is activated in menu Configuration of
general operating parameters.
This counter registers the quantity of linen washed in each machine program.
The counter increase is set by the value in kilograms or pounds introduced when starting each program and
it is executed at the end of the program.
On the multi-function keyboard the DEL function appears. This function allows erasing the counter related to
the selected program.
12. TEXT MESSAGES
This menu allows writing three text messages and determining when they appear after a number of hours
programmed.
12.1. PROGRAMMING MESSAGES AND MOMENT OF DISPLAY
Access to the TEXT MESSAGES menu following the steps indicated in section 10.
The three text messages available appear on the screen.
An asterisk next to some of the messages indicates that the message is programmed.
Select one of the three messages and confirm the selection by the •SEL• key on the multi-function keyboard.
The following screen appears.
In the position PROGRAMMED TIME, programme time the message has to appear using the numeric
keyboard.
In the position ACCUMULATED TIME will appear the time elapsed since the message was programmed.
Press the ·· key and access to the text line. Enter the text of the message. Follow the indications for text
writing in section 7.2.
Register in the memory the programming and start the time counting by pressing the ...key.
Other actions:
The •RESET• key on the multi-function keyboard re-initialises time counting.
Erase the programming of the message duration by programming 00000 in the position TIME
ACCUMULATED.
Erase the programmed message by key C on the numeric keyboard.