Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Programming a new program 34
Optional programming
Machines with double drain
Using the double drain requires
Option previously installed in the washing machine.
Configuration of two valves option in the corresponding DRAIN step in SETUP menu.
Possible programming:
No draining in the phase
Main drain draining
< < < Option programmed by default
Second drain draining
Machines with recovery tank
Pump and valve drain system designed to be connected to a recovery tank.
Operating this system requires:
Double drain set (valve + pump) corresponding to AS recovery tank.
Configuration of valve + pump option in the corresponding DRAIN step in SETUP menu.
Possible programming:
No draining in the phase
Main drain draining
< < < Option programmed by default
Pump to tank draining.
NOTE. To avoid the pump working without bath, after a draining time, the pump stops and opens
drain valve 1.
7.3.13. Draining speed
Programming this function is only possible if draining has been programmed.
There are six programmable speeds during draining.
The speeds 4, 5 and 6 are modifiable in the CONFIGURATION menu.
Possible programming Rotation speeds in rpm
Drain without drum rotation
Without rotation
Drain
< < < Option
programmed by default
E1
Rotation sequence and washing
speed programmed in wash phase.
Draining time non programmable
Drain +
positioning speed
E2 66
Drain +
low spin speed
E3 250
Drain +
medium spin speed
E4 405
Drain +
medium/high spin speed
E5 565
Drain +
high spin speed
E6 725