Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Executing programs 19
4.11. MACHINES WITH EASY-LOAD SYSTEM
The EASY-LOAD SYSTEM is made up of an auxiliary electronic control allowing the start of the drum rotation at
low speed to assist loading and unloading while the door of the machine is open.
At the same time, operating the corresponding control devices, a water inlet can be opened (cold or hot) to soak
the dry linen and reduce its volume. The maximum water level allowed in this situation is limited by program.
The water used during this process will be kept inside the washer when a new cycle is started. To drain the
water used during the loading process, turn off and on again the O/I switch on the control panel of the machine.
To use the EASY-LOAD system control, the optional A10 (TILT) board must be installed and appropriately
activated on the SETUP menu.
IMPORTANT SAFETY INSTRUCTIONS SPECIFIC FOR EASY-LOAD SYSTEM
The EASY-LOAD SYSTEM has JUST been designed to facilitate the washer's loading and unloading
operations. Therefore:
DO NOT MISLEAD NOR CANCEL THE PUSH-BUTTON that activate the drum's rotation with the door
open.
TO AVOID THE RISK OF DRAGGING, NOBODY MUST TOUCH THE LINEN WHILE ACTIVATING THE
DRUM ROTATION DEVICE
Because of the facility of rotating the drum with door open, during loading and unloading operations
NEVER MORE THAN ONE PERSON WILL OPERATE WITH THE MACHINE.
4.11.1. EASY-LOAD SYSTEM control panel
Control panel devices
ON switch (A): Switch installed on the front piece of the washing
machine.
Emergency stop (B): Red button with lock located in a visible and
accessible place on the washing machine.
STOP key (C): key on the numerical keyboard.
DRUM ROTATION push-button (D): Activates the drum rotation options
of the multi-function keyboard.
Graphics screen (E): it displays the different operations by means of
graphic icons.
Multi-function keyboard (F). It allows executing the TILT system options.