Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Information menu 52
11. INFORMATION MENU
The information menu allows access to information concerning the configuration and to the life of the
washing machine:
General information. About the washing machine model and the control characteristics.
Operation counters. There is a counter associated with each one of the main washing machine
operations that is increased each time said operation is executed.
Alarm counters. There is a counter associated with each one of the main system alarms that is
increased with the appearance of each alarm.
Executed program counters. This counter registers the individual quantity of executions of each
program.
Load counters. These counters only appear if the option PROPORTIONAL DOSING TIME has been
activated in the Configuration of general operating parameters menu (section 10.2.1).
To move among counters and within each counter use the MULTI-FUNCTION KEYBOARD the washing
machine.
To move among counters and within each counter
SEL
Counter selection
DEL
Setting the counter at zero (some counters only)
Accessing to previous level.
There is an option on the SETUP menu that allows setting the value of the different counters at zero.
Below, the distinct parameters that make up the INFO menu are listed.
11.1. GENERAL INFORMATION. CONTENT
Machine model. Identifies the washing machine model.
Program version
A5 Board version (I/O1)
A6 Board version (I/O2). Only machines with A6 board installed and activated in SETUP menu
A10 Board version (TILT). Only machines with A10 board installed and activated in SETUP menu
Free programs
Free phases
Updated information
11.2. OPERATION COUNTERS
Operating time
Programs executed
E2 spin cycles executed
E3 spin cycles executed
E4 spin cycles executed
E5 spin cycles executed
E6 spin cycles executed
Unbalances detected by the microswitch
Low-level unbalances
Medium-level unbalances
High-level unbalances