Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Programming a new program 33
7.3.11. Cooling gradient.
Optional programming
This function only appears if the COOLING GRADIENT parameter has been activated in the
CONFIGURATION menu and if gradual cooling YES has been programmed in the previous stage.
Controlling the cooling of the bath is possible in different gradients defined in degrees/minute.
The water temperature can modify the cooling speed, mainly in the fastest gradients.
Cooling gradients
Value in Centigrade degrees: 1º / minute
Value in Fahrenheit degrees: 2.0º / minute
Value in Centigrade degrees: 3º / minute
Value in Fahrenheit degrees: 5.5º / minute
< < < Option programmed by default
Value in Centigrade degrees: 5º / minute
Value in Fahrenheit degrees: 9º / minute
Value in Centigrade degrees: 10º / minute
Value in Fahrenheit degrees: 18º / minute
7.3.12. Draining
This function opens the drain valve.
The drum rotation speed during draining and the drain time are programmed in successive
operations.
Possible programming:
No draining in the phase
Yes, draining in the phase
< < < Option programmed by default