Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
Programming a new program 28
7.3. PROGRAMMING A PROGRAM PHASE
The program and the phase that are being programmed appear at the upper part of the screen.
The distinct programmable options at each operation appear simultaneously on the washing machine
screen.
The options are selected with the arrow keys. The icon of the option selected appears in white on a black
background.
The icon of the numerical keyboard indicates that the option or value must be selected with this keyboard.
Once the desired operation is selected, confirm the programming. The next operation is accessed.
To finish programming, executing the end of phase screen is essential (section 7.3.16).
Any other end of program mode will cause the washing machine to operate erroneously.
Optional programming. Attention message that appears when programming some operations. It
warns that this function might not appear during the programming process depending on the options in the
CONFIGURATION menu (section 10.2) or the SETUP menu. (To learn more details about the SETUP
menu: consult the Technical Assistance Service).
7.3.1. Water inlet
Possible programming
No water inlet
Cold water inlet
< < < Option programmed by default
Hot and cold water inlet mixture depending on the temperature programmed
Value of parameter A2 = HOT in SETUP menu. Value from works
.
Cold water inlet through inlet 2
Only if value of parameter A2 = COLD in SETUP menu
.
Third inlet option Optional programming
The third water inlet option permits connecting the washer to a third water supply and to program the water
intake from this third inlet.
Main use options.
CONNECTION SETUP PROGRAMMING
Water intake from third inlet
Water intake from AS recovery tank
Temperature programmed in this phase: NO
Connection of a water inlet
other than Water 1 and
Water 2 inlets.
From recovery tank.
INDEPENDENT
Water intake from third inlet
Water intake from AS recovery tank
Water mixture from third inlet and hot water
depending on the temperature programmed.
Connection to cold water
supply.
WATER 1
NON programmable.
Opens simultaneously with Cold Water (refer to
water inlet programming chart)
Connection to hot water
supply.
WATER 2
NON programmable.
Opens simultaneously with Hot Water (refer to
water inlet programming chart)
Using the third water inlet requires:
Option previously installed in the washing machine.
Configured as a separate inlet in the SETUP menu.