Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
System tools 50
SPIN SPEEDS
Modifying the value of the three highest spin speeds within the established limits is possible, always
respecting the ordering criteria from lowest to highest.
The value of each spin speed is expressed in rpm and it should always be higher than the lowest spin value
and smaller than the highest spin value.
Values programmable by the numerical keyboard
Programming limits
and table of values configured at works depending on the machine model.
programmable ranges
E
spin speed by default,
in rpm
minimum maximum
E3
275
no modif. no modif
E4
400
E3 + 1 E5 – 1
E5
570
E4 + 1 E6 – 1
E6
725
E5 + 1 default
10.3. SETTING THE CLOCK
The washing machine clock will allow the delayed start of programs (see section 4.8).
This menu permits setting the clock.
Access the set clock menu. The following parameters appear:
Minute.........................nn
Hour............................nn
Day week.............. --------
Day month ..................nn
Month..........................nn
Year...........................nn
Modify the value of each parameter using the •MOD• key on the multi-function
keyboard. The numerical values can also be modified by using the numerical
keyboard.
Access to the next parameter or going to the previous menu confirms the
selection.
The numerical values must be formed with two digits. Example:
third day of the month ....... 03
month of November .......... 11
year 2005:......................... 05
10.4. INITIALIZING THE CARD
This operation will be executed only in new cards or when there are problems recording data.
This operation erases the content of the card.
Access the CARD menu.
The message INITIALIZING THE CARD appears.
Confirm operation using the SEL key on the multi-function keyboard. The card will be operative.