Filter
Top Products
Cod. G522441
© Copyright 2009, Alliance Laundry System LLC – DO NOT COPY OR TRANSMIT Rev. 02/0510
System tools 49
ROTATION. (Start and stop sequences)
Modifying the start and stop times of the five pre-established rotations is possible.
Programmable range
:
ON: minimum: 2 seconds; maximum 25 seconds.
OFF: minimum: 2 seconds; maximum: 55 seconds.
Minimum start and stop time: 15 seconds.
Values programmable by the numerical keyboard
To maintain the order criteria from lowest to highest, the ON time of each rotation can’t never be less than
the start time of the lower rotation and will always be equal to or higher than the start time of the higher
rotation.
Programming limits
and table of values configured at works
values by default (sec)
programmable ON range
WR
ON OFF:
min.
max.
WR1 5 55
WR1
2sec. WR1 r2
WR2 5 10
WR1
1 WR2 r3
WR3 5 25
WR3
2 WR3 r4
WR4 15 15
WR4
3 WR4 r5
WR5 25 5
WR5
4 WR5 25sec
WASH ROTATION SPEEDS
Modifying the value of the four drum rotation speeds in the wash cycle within the established limits is
possible, always respecting the ordering criteria from lowest to highest.
The value of each speed is expressed in rpm and it should always be higher than the lowest spin value and
smaller than the highest spin value.
Values programmable by the numerical keyboard
Programming limits
and table of values configured at works depending on the machine model.
programmable ranges
WS
washing speed by default,
in rpm
minimum maximum
WS min 13 - - - - - - - - - - - -
WS1
17
WS min WS2 – 1
WS2
22
WS1 + 1 WS3 – 1
WS3
27
WS2 + 1 WS4 – 1
WS4
32
WS3 + 1 WS max
WS max 32 - - - - - - - - - - - -