Filter
Top Products
INTRAC-305 OPERATION
© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 47
3
REMOTE/LOCAL
1
2
3
4
5
6
shows the Alarms menu ie the currently
active alarms
toggles the INTRAC between Remote
and Local control modes
Home
Standby
(not used)
Show
Alarms
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
Beac Level
Beac Freq
El Angle
Az Angle
Pol Angle
Remote
Current Mode
Select
Local
(not used)
(not used)
Path HOME - MENU KEY 6
Menu Key 6 toggles the INTRAC-305 between Local (Front
Panel) and Remote control/operation.
Compare the above screen (remote selected) with the one for
the Home menu (local selected).
With Remote selected only three functions are available on
the front panel. The ability to display the active alarms (Show
Alarms), the ability to select Standby and the ability to return
control to Local.
All other menu functions are transferred to the Remote
Terminal.
Note Because the Diagnostics On/Off selection in the Configuration
Menu affect the Remote Port (see page 28) in order to be
able to use the Remote Terminal facility Diagnostics MUST
be set to OFF.