Filter
Top Products
OPERATION INTRAC-305
Page 16 INTRAC-305 MANUAL - Issue 3.2 ©2011 Advantech Wireless
GOTO (Position)
El Angle
Az Angle
Pol Angle
Beac Freq MHz
1
2
3
4
5
6
skips to the New Mode menu
skips to the Search menu
skips to the Goto Satellite menu
moves the highlight box to the next field
in the current menu
Current Mode Tracking
Control State Local
Beac Freq 11.452000 GHz
Beac Level -10.05 dB
El Angle 25.37
Az Angle 210.50
Pol Angle 27.4
Mode
Press EN to go to position
Next
Field
Search
Home
Standby
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
skips to the Home (root) menu
Goto
Satellite
New
Mode
Path HOME - NEW MODE - MENU KEY 4
Note Pressing menu key 4 (Goto) on the New Mode menu leads to
the Goto Position (as opposed to Goto Satellite) menu. Goto
Satellite and Search are accessed from this (Goto Position)
menu by Menu Keys 5 and 4 respectively.
Description Used to drive the antenna to the co-ordinates displayed.
The co-ordinates can be set by using menu key 6 (Next Field)
to step through the three angles and the Beacon Frequency.
The co-ordinate enclosed in the box can be edited from the
numeric keypad. The & keys are used to move the
cursor to the desired character.
Pressing the ENTER key causes the antenna to commence
driving to the set co-ordinates. When the antenna reaches
the position the INTRAC enters STANDBY Mode.