Filter
Top Products
INTRAC-305 OPERATION
© 2011 Advantech Wireless INTRAC-305 MANUAL - Issue 3.2 Page 7
3
3. OPERATING THE INTRAC-305
The INTRAC-305 may be operated directly from the front
panel or from the (optional) Remote Control and Monitoring
Terminal.
For both methods of operating a series of menus enables a
user to program the INTRAC and to invoke its modes of
operation.
Operation from the front panel is described in this section of
the manual. The (optional) remote terminal (the RCM-4) is
described in the appendices.
FRONT PANEL
LCD Display Panel This displays the current status of the INTRAC-305 and the
selected menu which includes the labels for the menu keys.
Menu Keys These six keys have functions dependant on the selected
menu. The right side of the menu display indicates the
function of each key for that menu.
Numeric Keypad The keypad is used to enter or edit data into the INTRAC.
The & keys move the cursor left and right.
The +/- key is used to change the sign or, in some cases to
insert a space character.
Manual Control Keys For manual control of the antenna pointing when the INTRAC
is in manual mode.
System Alarm Indicator Illuminates when a primary alarm occurs and remains on until
the cause of the alarm is cleared.
Note. An active primary alarm disables antenna drive.
POWER
CONTROL
SYSTEM ALARM
MANUAL
+
/
-
ENTER
0
4
7
1
5
8
2
3
6
9
Intrac Antenna Controller
INTRAC 305
EMERGENCY
STOP
LCD DISPLAY PANEL
ON/OFF
SWITCH
NUMERIC KEYPAD
EMERGENCY STOP
BUTTON
SYSTEM ALARM
INDICATOR
MENU KEYS
MANUAL CONTROL KEYS
(STATUS LEDS on
DUAL PSU unit)