Advantech INTRAC-305 Washer User Manual


 
OPERATION INTRAC-305
Page 42 INTRAC-305 MANUAL - Issue 3.2 ©2011 Advantech Wireless
EDIT NORAD BUFFER
1
2
3
4
5
6
puts the antenna control system into
STANDBY mode and skips to the HOME
menu
skips to the Home (root) menu
checks the validity of the contents of the
NORAD buffer
cycles the character at the cursor
position through the alphabet
inserts a decimal point at the cursor
position
moves the highlight box to the next field
in the current menu
Current Mode Tracking
Control State Local
Beac Freq 11.452000 GHz
Beac Level -10.05 dB
El Angle 25.37
o
Az Angle 210.50
o
Pol Angle 27.4
o
Standby
Home
Valid
check
A - Z
Decimal
Point
Function
Press EN to accept all fields
Next
Field
Char No:019
92 50 A 95100.94672
Min Intv 3
Day Perd 28
Path HOME - FUNCTION - MODELS -
MENU KEY 6 (x4) - ENTER
or From Configuration or System Setup
MODELS - MENU KEY 6 (x4) - ENTER
Description This menu is used to input NORAD Ephemeris data.
Menu Key 6 (Next Field) steps the edit box through the three
entry fields. The NORAD string data is entered in the top
box. Char No: ___ indicates the position of the cursor in the
data string. As the cursor reaches the right end of the edit
box the data scrolls.
Data is entered/edited using Menu Keys 4 & 5 (A - Z and
Decimal Point) and the Numeric Keypad.
To enter an alphabet character position the cursor and press
Menu Key 4. Each press steps the character at the cursor
position through the alphabet.
Menu Key 5 inserts a decimal point at the cursor position.
The +/- key on the Numeric Keypad inserts a - or a space at
the cursor position. One press inserts a - and the next a
space.
Note Inserting a number causes the cursor to step to the next
character position. However inserting a letter, a - or a space
does not and the key must be used to move on.
Min Intv = Minimum Interval
Day Perd = Day Period