62 Connect Power Cable and Optional UPS Battery Pack
VX5 User’s Guide E-EQ-VX5OGWW-F-ARC
Connect Power Cable and Optional UPS Battery Pack
1. Turn the VX5 off before attaching the power plug.
2. Connect the power cable to vehicle power (See the following section titled “Vehicle
12-80VDC Direct Connection.”)
- or -
to an AC adapter. (See the following section titled “External Power Supply.”).
3. Several possibilities are available for routing the vehicle power to the VX5. See the
following section titled “Vehicle 12-80VDC Direct Connection” for details.
4. All plugs and receptacles are keyed and care must be used when connecting the cables.
Tighten the nut of the plugs clockwise until tight.
Secure the cable with the strain relief cable clamps.
T10A, 125V
INPUT:
12-80VDC
6A 72W
ETHERNET /
USB
KEYBOARD /
MOUSE
COM2/3COM1 / SCANNER
UDIO
N107
REFER TO
MANUAL
IP66
LISTED
I.T.E.
E-130794
C
PRODUCT OF U.S.A. U.S. PATENT 5862393
US
U
L
®
THIS DEVICE COMPLI ES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEV ICE MAY NOT CAUSE HARMF UL
INTERFERENCE, AND (2) THIS DEV ICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
This Clas s A digita l apparatus comp lies with
Canadian ICE-003.
Cet appareil num de la Classe A est
confirme là n
érique
orme NMB-003 du Canada
CAUTION: For continues protection against risk of fire,
replace only with same type and rating of fuse.
ATTENTION: Pour ne pas compromette la preotection
contre les risques d'incendie, remplacer par un fusible
de mêmes types de mêmes caractéristques nominales.
!
Figure 62 Connect Power Cable to VX5
5. Turn the VX5 on.
