36 Install Mounting Brackets
VX5 User’s Guide E-EQ-VX5OGWW-F-ARC
3. If using the optional integrated keyboard bracket, there are two arms included. Slip the
larger RAM arm over the ball on the vehicle RAM ball base or the RAM clamp mount.
Insert the ball of the RAM mount bracket into the RAM arm. Adjust the VX5 to the
desired position and tighten the knob on the RAM arm using the supplied RAM wrench.
Slip the smaller arm over the RAM ball on the keyboard mounting bracket. Insert the
RAM ball on the keyboard mounting plate into the RAM arm. Adjust the keyboard to the
desired position and tighten the knob on the RAM arm using the supplied RAM wrench.
Figure 29 RAM Assembly with Keyboard
Note: RAM ball base shown.
Note Excess keyboard cable length can be looped around the hooks on the bottom of
the keyboard mounting plate.
Make sure there is a minimum 1” (25.4 mm) clearance between the VX5 and the
keyboard.
