Install Mounting Brackets 49
E-EQ-VX5OGWW-F-ARC VX5 User’s Guide
VMT Remote Keyboard Bracket Assembly
1. Keyboard Cable
2. VMT Keyboard
3. Bracket
4. Mounting Surface
5. Mounting Hardware (not shown):
Screws, 8-32x5/8 (4 each) for use
with the 95-key keyboard
Screws, 10-32x5/8 (4 each) for
use with the 60-key keyboard
Figure 44 VMT Remote Keyboard Bracket Assembly
Equipment Needed: Phillips screwdriver, torque wrench.
1. Place the keyboard face down on a flat, stable surface.
2. Position the bracket on the keyboard base, aligning the four screw holes in the
keyboard with the four mounting holes in the bracket flanges. When positioned
correctly, the bracket should overlap at the top of the keyboard.
3. Attach the keyboard to the bracket with four screws (included). Tighten to 9 +/- 1
lbf.in (1.02 N.m).
4. Attach the keyboard-bracket assembly to the vehicle’s mounting surface using four 1/4
bolts, lock washers and flat washers or equivalent.
Note: Bolts, washers, and wrench needed when attaching the bracket to the vehicle are not
supplied by LXE.
IMPORTANT: Mount to the most rigid surface available.
