IBM DS6000 Manual

A SERVICE OF

next previous

174 IBM System Storage DS6000 Series: Copy Services with IBM System z

Figure 14-4 Select source I/O ports

Now you must define a target I/O port for each source port. In the example shown in

Figure 14-5, there are no selections; however, for your setup you might see menus. Click

Next.

Figure 14-5 Select target I/O ports

Next, the panel shown in Figure 14-6 on page 175 opens. Here you can indicate whether the

paths will be a Consistency Group path by using the check box. Click

Next.