Filter
Top Products
Chapter 2: Controls and Indicators
2-4 EMM-E6 Installation Guide
EPIM Connector Pins
The EPIM connector pins are two sets of built-in pins that connect the
EMM-E6 Ethernet Channel D to optional EPIM modules. The proper
insertion of the EPIM will automatically connect these pins to the
connector located on the EPIM.
Figure 2-3 EMM-E6 Internal Components
SDRAM SIMM Slot
The EMM-E6 motherboard provides the option of upgrading memory
capacity by using Single In-line Memory Modules (SIMMs).
The EMM-E6 comes with 4 Megabytes (MB) of Shared Dynamic
Random Access Memory (SDRAM) built into the module. The SDRAM
temporarily stores the packets received be the module while forwarding,
filtering, and error checking operations are performed.
LSI
Logic
LSI
Logic
FLASH Memory SIMM Slot (shown populated)
LDRAM SIMM Slot (shown populated)
BRIM-F Ribbon Connector
SDRAM SIMM Slot
1926n03
ICH1Book Page 4 Tuesday, August 6, 1996 3:06 PM