Filter
Top Products
450260-1 www.amdry.com 43
Outputs:
1. FSS (GREEN LIGHT EMITTING DIODE [L.E.D.])
This L.E.D. indicates the activation of the water
system. When the system is activated the L.E.D. is
ON.
2. PGR2 (GREEN L.E.D.)
This is for a spare output to be programmed.
3. R_HEAT (GREEN L.E.D.)
This L.E.D. will indicate the status of the rear heat
output. If the request to turn on the rear heater is
made, then the L.E.D. is ON.
4. AUDIO ALERT (GREEN L.E.D.)
This L.E.D. will indicate the status of the horn output.
If the request to turn on the horn is made, then the
L.E.D. is ON.
5. FWD (GREEN L.E.D.)
This L.E.D. will indicate the status of the basket
(tumbler) forward direction output. If the request to
tumble the drum in the forward direction is made,
then the L.E.D. is ON.
6. AIR JET (GREEN L.E.D.)
This L.E.D. will indicate the status of the air jet
output. If the request to turn on the air jet is made,
then the L.E.D. is ON.
7. PGR3 (GREEN L.E.D.)
This is for a spare output to be programmed.
8. PGR1 (GREEN L.E.D.)
This is for a spare output to be programmed.
9. F_HEAT (GREEN L.E.D.)
This L.E.D. will indicate the status of the front heat
output. If the request to turn on the front heater is
made, then the L.E.D. is ON.
10. FAN (GREEN L.E.D.)
This L.E.D. will indicate the status of the fan output.
If the request to turn on the fan (blower) is made,
then the L.E.D. is ON.
11. REV (GREEN L.E.D.)
This L.E.D. will indicate the status of the basket
(tumbler) reverse direction output. If the request to
tumble the drum in the reverse direction is made,
then the L.E.D. is ON.
12. EOC (GREEN L.E.D.)
This L.E.D. will indicate the status of the end of cycle
light output. If the request to turn on the end of cycle
light is made, then the L.E.D. is ON.
13. OCL4 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #4. If the request to turn on the open
collector output #4 is made, then the L.E.D. is ON.
(Programmable and defaulted to front down).
14. OCL3 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #3. If the request to turn on the open
collector output #3 is made, then the L.E.D. is ON.
(Programmable and defaulted to lint drawer).
15. OCL2 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #2. If the request to turn on the open
collector output #2 is made, then the L.E.D. is ON.
(Programmable and defaulted to front door closed).
16. OCL1 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #1. If the request to turn on the open
collector output #1 is made, then the L.E.D. is ON.
(Programmable and defaulted to front door open).
17. OCL5 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #5. If the request to turn on the open
collector output #5 is made, then the L.E.D. is On.
(Programmable and defaulted to rear down).
18. OCL6 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #6. If the request to turn on the open
collector output #6 is made, then the L.E.D. is ON.
(Programmable and defaulted to rear door open).
19. OCL7 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #7. If the request to turn on the open
collector output #7 is made, then the L.E.D. is ON.
(Programmable and defaulted to rear door closed).
20. OCL8 (GREEN L.E.D.)
This L.E.D. will indicate the status of the open
collector output #8. If the request to turn on the open
collector output #8 is made, then the L.E.D. is ON.
(Programmable and defaulted to Spare).