Filter
Top Products
Important
You must disconnect and lockout the electric supply
and the gas supply or the steam supply before
any covers or guards are removed from the
machine to allow access for cleaning, adjusting,
installation, or testing of any equipment per OSHA
(Occupational Safety and Health Administration)
standards.
Please observe all safety precautions displayed
on the equipment and specified in the installation
manual included with the dryer.
For Your Safety
Do not store or use gasoline or other flammable
vapor and liquids in the vicinity of this or any other
appliance.
Do not dry mop heads in the dryer.do not use dryer
in the presence of dry cleaning fumes.
Caution
Dryers should never be left unattended while in
operation.
Warning
Children should not be allowed to play on or near
the dryers.
Children should be supervised if near dryer(s) in
operation.
The dryer must never be operated with any of the
back guards, outer tops, or service panels
removed. Personal injury or fire could result.
Dryer must never be operated without the lint filter
or screen in place, even if an external lint collection
system is used.
The wiring diagram for the dryer is located in the
front electrical control box area.
Table of Contents
Reference Guide (Front) ............................... 2
Reference Guide (Left Side) ..........................3
Reference Guide (Right Side) ........................4
Reference Guide (Right Side) ........................5
Safety Precautions........................................ 6
Routine Maintenance .................................... 7
Cleaning.................................................................. 7
Lubrication .............................................................. 7
Adjustments ........................................................... 8
Installation Requirements ............................ 8
Enclosure/Air Supply/Exhaust Requirements .......... 8
Electrical And Gas Requirements............................ 8
Operational Service Check Procedure ..................... 9
Component Description/Replacement .......... 9
Gas Burner and Ignition System ............................. 9
Pilot Gas Supply Line ............................................11
Main Gas Supply Line ............................................11
Natural Gas and Liquid Propane (L.P.) Gas
Conversion Instructions ......................................... 15
Steam Heat System.............................................. 15
Tilting System Description .................................... 17
Air Jet System ...................................................... 20
Blower (Squirrel Cage Fan) Motor Assembly ......... 21
Blower (Squirrel Cage Fan)
Electrical Components .......................................... 23
Filter/Regulator Assembly ..................................... 24
Compressed Air System ....................................... 25
Door Systems ....................................................... 26
Control and Electrical System ............................... 29
Basket (Tumbler) System ..................................... 35
Safety Devices ...................................................... 39
Top of Tumbler (Basket) ........................................ 40
Phase 7 Non-Coin System Diagnostics ....... 41
Diagnostic L.E.D. Display Fault Messages ........... 41
Input/Output (I/O) Board L.E.D. Indicators ............. 41
Troubleshooting and Replacement .............44
Procedure for Functional Check of
Replacement Components ......................... 47
Sensor Activated Fire Extinguishing
(S.A.F.E.) System .......................................... 47