Alliance Laundry Systems UW60P2 Washer User Manual


 
Programming
25
F232090
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Edit Cycle
Add Step
Edit Cycle is pressed followed by a two-digit cycle code number to display the steps of a
preprogrammed cycle. The cycle may be altered during the edit cycle procedure by deleting,
changing, or adding steps.
Add Step is pressed to add a step to an existing cycle during the edit cycle procedure.
Clear (black
on red
background)
Clear is pressed when an error has been made in programming a step. Instead of pressing Enter as the
step is completed, press Clear to eliminate the incorrect information. (Clear should never be pressed
when displaying a cycle unless a particular step is to be eliminated or changed. See
Displaying a Cycle in Memory.)
Drain
Drain is pressed after a wash, dilution rinse, or soak step is programmed in order to remove water
from the machine. A time must be assigned that will allow the machine to reach empty. If the
computer has been prompted for two drains, press key 1 or key 2 for the desired drain valve. See
Prompting the WE-6.
Auxiliary
No Reverse
Auxiliary is pressed to activate the buzzer or other auxiliary output.
No Reverse is used to rotate the basket in one direction only during a step and should be pressed just
before pressing the Enter key.
Enter
Enter is pressed to enter programming information into the computer’s memory.
Programming Keypad (Continued)
Red Keys Description