Filter
Top Products
Operation
F232090
10
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
This manual is designed as a guide to operating and
programming the UW35P and UW60P 2-speed and
3-speed rigid-mount washer-extractor equipped with
the WE-6 microcomputer.
The UWP washer-extractor features programmable
custom cycles and high
extract force.
The manuals, installation instructions, and wiring
diagrams which accompany the washer-extractor have
been included with the machine at no charge.
Additional copies are available at a nominal charge.
NOTE: Read this manual thoroughly before
attempting to operate the machine or program the
microcomputer.
NOTE: Do not use this manual in conjunction with
earlier model microcomputer-controlled UW
washer-extractors. Do not use technical literature
intended for earlier models when operating this
machine.
NOTE: All information, illustrations, and
specifications contained in this manual are based
on the latest product information available at the
time of printing. We reserve the right to make
changes at any time without notice.
Delivery Inspection
Upon delivery, visually inspect crate, protective cover,
and unit for any visible shipping damage. If the crate,
protective cover, or unit are damaged or signs of
possible damage are evident, have the carrier note the
condition on the shipping papers before the shipping
receipt is signed, or advise the carrier of the condition
as soon as it is discovered.
Remove the crate and protective cover as soon after
delivery as possible. If any damage is discovered upon
removal of the crate and/or protective cover, advise the
carrier and file a written claim immediately.
Customer Service
If literature or replacement parts are required, contact
the source from whom the washer-extractor was
purchased or contact Alliance Laundry Systems at
(920) 748-3950 for the name and address of the
nearest authorized parts distributor.
For technical assistance, call:
(920) 748-3121
Ripon, Wisconsin
Serial Plate Location
A record of each machine is on file with the
manufacturer. Always provide the machine’s serial
number and model number when ordering parts or
when seeking technical assistance.
Refer to Figure 2.