Filter
Top Products
Operation
15
F232090
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Display Interpretations
UWP_01
Program identification code (ROM).
This is an example only.
DONE
End of cycle
DOOR
Door not locked problem
EMTY
Empty problem
FILL
Fill problem
SDLY
Spin coast delay
NEXT
Select cycle or open door or select
program
NCYC
Cycle not available
STOP
Stop button pressed or cycle ended
A1
Auxiliary output #1
A2
Auxiliary output #2
A3
Signal
CF
Cold flush
CH
Cold fill to high level
CM
Cold fill to medium level
CL
Cold fill to low level
CO
Cold fill to overflow
CR
Cold rinse
CY
Cycle number
D1
Drain #1
D2
Drain #2 (This feature is operational on
UWPV models only.)
F
Heat select temperature in ° Fahrenheit
C
Heat select temperature in ° Centigrade
HF
Hot flush
HH
Hot fill to high level
HM
Hot fill to medium level
HL
Hot fill to low level
HO
Hot fill to overflow
HR
Hot rinse
HS
High speed spin
MS
Medium speed spin
HT
Heat (steam or electric)
--M
Minutes (used when programming
time)
--S
Seconds (used when programming
time)
SK
Soak
S1
Supply #1 (Detergent)
S2
Supply #2 (Bleach)
S3
Supply #3 (Sour)
S4
Supply #4 (Softener)
S5
Supply #5 (Specialty)
TH
Controlled temperature fill to high
level
TM
Controlled temperature fill to medium
level
TL
Controlled temperature fill to low level
TO
Controlled temperature overflow
W1
Wash #1 (normal reversing)
W2
Wash #2 (gentle reversing)
W3
Wash #3 (no agitation)
W4
Wash #4 (distribution speed–forward
only)
W5
Wash #5 (temp.-controlled cool-down)
WF
Warm flush
WH
Warm fill to high level
WM
Warm fill to medium level
WL
Warm fill to low level
Display Interpretations (Continued)