Filter
Top Products
17
NOTE: DO NOT ATTEMPT TO REMOVE THE TIMER KNOB BY PULLING FROM
THE FRONT. Doing so will damage the split shaft and require replacing the
entire timer assembly.
1. To remove the timer knob, push the knob in from the front.
2. At the back of the timer, pull the black tab out approximately 3/16”, then pull the timer knob
off the shaft.
3. Slide the timer dial from the timer hub.
4. Unplug the wiring harness connector from the timer assembly terminals.
5. Remove the one (1) Hex-head screw securing the left side of the timer assembly to the console
mounting plate. Then lift the left side and slide the tabs at the right side of the timer assembly
from the console mounting plate.
BLACK TAB
MOUNTING SCREW
Fig. 3-3
Fig. 3-4
Removing the Timer
There are two types of timers. One can be identified by a plastic body. The other has a metal body.
Plastic Body