Filter
Top Products
106
7. Following agitation the water will drain from the tub. No agitation occurs.
8. The washer will spin while clean water is sprayed into the basket. There are two (2) 15 second
clean water sprays during the final spin.
Temperature Selector
The temperature Selector allows for four (4) different water temperature settings for the wash and
rinse cycles. The water temperature can be matched to the types of fabrics and soils being washed.
Water Level Selector
The Water Selector allows for five (5) water levels to be selected depending on the size of the wash
load. To change the water level after the washer has started, move the selector to the desired setting.
Dryer Controls
Cycle Control Knob
The dryer features seven (7) different drying cycles. Two of these are Timed Dry Cycles: Timed Dry
and Air Dry. The other five are automatic.
Dryer Temperature Control
The Dryer Temperature Control is controlled in the timer; high, low and air.
Push To Start Button
The Push to Start button is used to start the dryer operation. It must be repressed after the dryer door
has been opened during a cycle.
End Of Cycle Signal
The push to start button controls a signal to let you know when the cycle has finished. The signal can
be turned on or off.
Fig.
5-2
LARGE CAPACITY
HEAVY DUTY SOFT HEAT
PUSH TO START
DRYER
PERM PRESS/
NORMAL
TIMED DRY
TOUCH UP
HIGH HEAT
NO HEAT
LOW HEAT
HIGH HEAT
NORMAL AUTO DRY SETTING
50
40
20
10
10
OFFDRYING COOLING
20
30
LESS DRY
LESS DRY
MORE DRY
SIGNAL OFF SIGNAL ON
MORE DRY
AIR DRY
KNIT/DELICATE
*
*