Filter
Top Products
114
Dryer Toe Panel Access
1. Remove the Transition Panel by removing the three (3) retaining
screws.
2. Using a putty knife, release the two (2) retaining clips and remove
the toe panel.
(Fig. 5-24)
Fig. 5-24
Door Front Panel Access
1. Remove the transition panel and the Toe Panel.
2. Flip down the Control Panel.
(Fig. 5-26)
3. Disconnect the Door Switch Wires.
4. Remove the Control Panel from the Front Panel and set it on top of the unit.
(Fig. 5-27)
Fig. 5-26
Fig. 5-27
Screws
Fig. 5-25
Gas Burner
Assembly
Heat
Element
Blower
Assembly
Drive
Motor
Door
Switch
Wires