Filter
Top Products
117
Dryer Belt Replacement
1. Remove the Dryer Toe Panel.
2. Remove the Lint Filter and the Lint Duct Assembly.
3. Remove the Blower Assembly.
4. Remove the Dryer Front Panel.
5. A new Drive Belt can now be looped over the Dryer
Drum.
6. Loop the Drive Belt over the Drive Motor Pulley.
(Fig. 5-33)
7. Pull the Tension Pulley up and place the belt on it so that
the belt is tight when the pulley is released.
Fig. 5-33
Drum
Idler Pulley
Motor Pulley
Belt Routing Diagram
Viewed From Front
Direction Part Turns