Filter
Top Products
Installation
27
M414905
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Figure 12
How to Change Burner Orifice Size
1. Disconnect electrical power from tumbler. Close
gas shut-off valve to tumbler. Refer to Figure 11.
2. Remove spud holder.
Johnson G96 Gas Valve – Unscrew spud holder
nut near gas valve. Remove the burner orifice(s)
from spud holder. Refer to Figure 12.
3. Install the new, correct burner orifice(s). Refer to
Figure 13 and Table 1. Torque each to 9 – 10 Nm.
4. Reinstall spud holder assembly to gas valve,
making certain burner orifice(s) are in line with
burner tube opening. Refer to Figure 13.
5. Commission tumbler for use.
NOTE: Blank burner orifices are Part No.
M400995.
TMB1527N
1 Burner 8 Anti-Torque Ring
2 Gas Valve 9 Manifold Pipe
3 Regulator Plate 10 Spud Holder
4 Gasket 11 Pressure Tap
5 Plate 12 Burner Orifice
6 Regulator Cap 13 Burner Tube Openings
7 Spud Holder Nut
1
10
9
8
7
6
5
4
3
2
11
13
12