Filter
Top Products
Positioning the Dryer on the Floor;
Mounting the Hopper on the Throat
WARNING: You are responsible for the structural integrity of this installation.
We recommend that you:
• Use bolts no smaller than 3/8 in. (M 10) to mount the hopper on the throat of
a processing machine.
The hopper bolts to the throat of the processing machine, as pictured above.
The dryer can be positioned on the floor near the processing machine.
3-8 l Installation
Tools for installation:
❒ 9/16” wrench
❒ Flathead screwdriver
❒ Hoist