Filter
Top Products
29
f. Secure the 28-inch (71.12 cm) diameter exhaust duct transition piece to the dryers rectangular exhaust
duct with the 1/4-20 self-tapping screws (supplied with the dryer).
The exhaust duct exits from the rear of the base.
g. On dryers equipped with automatic (piston operated) load doors, reconnect the four (4) poly-flo air lines
that run from the dryer base up to the door pistons in the front and the rear of the dryer.
h. Reconnect the 1/4 poly-flo air lines which run from the dryer base up to the steam damper solenoid
valve (located on top of the dryer).
STEAM FLEX HOSE UNION RECONNECTION VIEW
TILTING PISTON RECONNECTION VIEW
TILTING GUARD PANEL RECONNECTION VIEW
MLS-410 2 Door/2-Way Tilt
MAN3507