Filter
Top Products
26
e. Secure the 28-inch (71.12 cm) diameter exhaust duct transition piece to the dryers rectangular exhaust
duct with the 1/4-20 self-tapping screws (supplied with the dryer).
The exhaust duct exits from the rear of the base.
f. On dryers equipped with automatic (piston operated) load doors, reconnect the two (2) poly-flo air lines
that run from the dryer base up to the door pistons.
g. On dryers equipped with a sprinkler option, a separate power supply must be connected to the sprinkler
circuit located in the right base electrical box.
1) The optional sprinkler water connection is located in the left side of the dryer base. A 1-inch M.P.T.
water supply line will be connected to the 1-inch F.P.T. pipe connection of the dryer.
MLG-410 1 Door/Forward Tilt
with Sprinkler
TILT GUARD RECONNECTION VIEW GAS FLEX HOSE RECONNECTION VIEW
TILTING PISTON RECONNECTION VIEW
TILTING POST RECONNECTION VIEW
MAN2247
MAN2771
MAN3506
MAN3507