Filter
Top Products
F232072 11
Section 2
Operation
This manual is designed as a guide to operating and
programming the 18-pound and 25-pound capacity
cabinet freestanding washer-extractors equipped
with the V-computer and AC inverter drive. The
models covered by this manual are designed for use
in on-premises laundries.
Keep the manuals, installation instructions, and the
wiring diagrams which accompany the machine in a
safe place for ready reference. They have been
included with the machine at no charge. Additional
copies are available at a nominal charge.
Note: Read this manual thoroughly before
attempting to operate the machine or program the
microcomputer.
Note: Do not use this manual in conjunction with
earlier model computer-controlled machines. Do
not use technical literature intended for earlier
models when operating this machine.
Note: All information, illustrations, and
specifications contained in this manual are based on
the latest product information available at the time
of printing. We reserve the right to make changes at
any time without notice.
Customer Service
If literature or replacement parts are required,
contact the source from whom the machine was
purchased or contact Alliance Laundry Systems
LLC at (920) 748-3950 for the name and address of
the nearest authorized parts distributor.
For technical assistance, call any of the following
numbers:
(850) 718-1035
(850) 718-1026
Marianna, Florida
(920) 748-3121
Ripon, Wisconsin
A record of each machine is on file with the
manufacturer. Always provide the machine’s serial
number and model number when ordering parts or
when seeking technical assistance.
Machine Familiarization Guide
The machine familiarization guide in Figure 2
provides front and rear views of the washer-
extractor and identifies the major operational
features of the machine.