Filter
Top Products
33
V-Belt Tension Alignment - Motor To Idler
1. Loosen two (2) bolts connecting idler arm to backup plate.
2. Back off on jam nut(s) on the adjusting bolt.
3. Loosen/tighten adjustment bolt to decrease/increase belt tension.
4. Tighten adjustment bolt jam nut(s).
5. Tighten the two (2) bolts loosened in Step #1.
To Replace V-Belts
1. Loosen tension on V-belts, so that they can easily be rolled off pulleys.
2. Replace V-belts.
3. Retighten V-belts and adjust tension and alignment per previous instructions.