Filter
Top Products
26
F. STEAM CONTROLS
Installation
Piping must be installed in accordance with good commercial steam system practice. See the illustration below
for a typical pipe arrangement.
To Replace Steam Coil (Damper System)
1. Discontinue electrical power to the dryer.
2. Remove the four (4) lock washers and hex nuts securing the hinges to steam coil.
3. Remove hinges from steam coil housing (these will be used on new assembly).
4. Remove six (6) washers and hex nuts securing steam coil to dryer.
5. Remove steam coil assembly.
6. Reverse procedure for new steam coil assembly.