![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/7/7b/77bcc459-9592-4e83-9982-c3e7a4455aae/77bcc459-9592-4e83-9982-c3e7a4455aae-bg59.png)
Specifications
85
7
❖ Weight:
Approximately 20 kg (44.1 lb.) (toner cartridge and power cable included)
❖ Warm-up Time:
Less than 19 seconds (23°C, 73F)
❖ Paper Capacity:
*1
Paper weight: 60 - 105 g/m
2
(16 - 28 lb.)
*2
You can load up to 10 envelopes (55 - 157 g/m
2
, 14 - 42 lb.) at the same time.
*3
To use the envelope feeder unit, the optional paper feed unit is required. The pa-
per tray of the feed unit can be replaced with the envelope feeder unit.
*4
For more information about envelopes, see p.10 “Envelopes”.
❖ Paper Output Capacity:
250 sheets (80 g/m
2
, 20 lb.)
❖ Memory:
Standard 128 MB, up to 256 MB (with the optional memory unit)
❖ Network:
Topology: Ethernet (10BaseT/100BaseTX)
Protocol: TCP/IP, NetBEUI, IPX/SPX, AppleTalk
❖ Optional Equipment:
• Paper Feed Unit Type 610
• Envelope Feeder Type 610
• Duplex Unit AD610
• Memory Unit Type C 256MB
• Hard Disk Drive Type 2600
• 1394 Interface Unit Type 4510
• 802.11b Interface Unit Type F
• Bluetooth Interface Unit Type C
Standard paper tray
500 sheets
*1
(80 g/m
2
, 20 lb.)
Bypass Tray
*2
100 sheets
*1
(80 g/m
2
, 20 lb.)
Optional Paper Feed Unit × 2
500 sheets × 2
*1
(80 g/m
2
, 20 lb.)
Optional Envelope Feeder
*3
60 envelopes
*4
KirP4GB_Mainte-F6_FM_forPaper.book Page 85 Thursday, May 12, 2005 11:48 AM