Paper and Other Media
16
1
I Lift the front side of the tray, and
then place it into the printer.
Carefully slide it into the printer
until it stops.
Important
❒ Do not slide the paper tray in
with force. If you do, the front
and side guides might move.
J Attach the paper tray cover pro-
vided when you have pulled out
the tray extension.
Note
❒ The paper tray cover contains
four mounting holes.
• Use the two outer holes when
attaching the paper tray cov-
er as a cover for the standard
tray.
• Use the two inner holes when
attaching the paper tray cov-
er as a cover for an additional
tray.
If you load a paper size that is not
selected automatically
To load paper whose size cannot be
selected automatically, set the paper
size on the control panel. Follow the
procedure described below to set the
paper size.
A Press the {Menu} key.
The [Menu] screen appears on the
display.
B Press the {U} or {T} key to dis-
play [Paper Input], and then press
the {# Enter} key.
The paper selection menu appears.
C Press the {U} or {T} key to dis-
play [Tray Paper Size], and then
press the {# Enter} key.
The paper tray selection menu ap-
pears.
D Press the {U} or {T} key to dis-
play the target paper tray, and
then press the {# Enter} key.
The paper size selection menu ap-
pears.
ZKGY150E
ZKGH240E
Menu:
Paper Input
Tray Paper Size:
Tray 2
AGN503S
KirP4GB_Mainte-F6_FM_forPaper.book Page 16 Thursday, May 12, 2005 11:48 AM
