Cleaning the Registration Roller
47
3
Cleaning the Registration Roller
If the registration roller is dirty, a mis-
feed might occur. In this case, clean
the roller as follows:
WARNING:
CAUTION:
Clean the registration roller if dots
(caused by specks of paper stuck to
the roller) appear on printed OHP
transparencies.
A Turn off the power, and then un-
plug the power cable.
B Open the front cover by pushing
the front cover release button.
C Pull the toner cartridge out of the
printer by holding the grips of the
cartridge.
Note
❒ Do not hold the toner cartridge
upside down or stand it verti-
cally.
❒ Do not put the toner cartridge
on an unstable or tilted surface.
D Wipe around the metallic regis-
tration roller by turning with a
soft damp cloth.
Important
❒ Do not use chemical cleaner or
organic solvent such as thinner
or benzene.
• Be sure to turn off the power
and wait for about 30 minutes
before cleaning the registra-
tion roller. Not waiting for the
printer to cool down can result
in a burn.
• The inside of this printer be-
comes very hot. Do not touch
parts labelled “v” (indicating a
hot surface). Touching these
parts will result in burns.
AGN020S
AGN022S
ZKGX461E
KirP4GB_Mainte-F6_FM_forPaper.book Page 47 Thursday, May 12, 2005 11:48 AM
